A Certificate of Analysis (CoA) is the single most important document a researcher can review before working with any peptide. It is the laboratory report that confirms what a vial actually contains — its identity and its purity — independent of whatever a label claims. This guide explains how to read a peptide CoA field by field, which tests matter, and the red flags that separate verified compounds from unverified ones.
What a Certificate of Analysis is
A CoA is a document, produced by an analytical laboratory, that reports the results of tests run on a specific batch of material. For research peptides it answers two questions: Is this the compound it claims to be? (identity) and How pure is it? (purity). A CoA is always tied to a specific batch or lot number — it describes that production run, not the product in general.
The two tests that matter most
HPLC — purity
High-Performance Liquid Chromatography (HPLC) separates the contents of a sample and measures how much of it is the target peptide versus everything else. The result is reported as a purity percentage. For research-grade material, a figure of 98% or higher is the common working standard. HPLC is what tells you a vial is mostly the intended compound rather than a mixture of fragments, salts, or unrelated material.
Mass Spectrometry — identity
Mass Spectrometry (MS) measures the molecular weight of the compound and confirms it matches the known weight of the peptide named on the label. HPLC can tell you something is pure; MS tells you it is pure and correct. A complete CoA includes both — purity without a confirmed identity is only half the picture.
Anatomy of a CoA: reading it field by field
- Compound name and sequence — the peptide being tested, ideally with its amino-acid sequence or molecular formula.
- Batch / lot number — ties the report to a specific production run. No lot number means the document cannot be matched to the vial in your hand.
- Test date — when the analysis was performed; it should be recent relative to the batch.
- Purity result — the HPLC percentage, usually shown alongside the chromatogram (the graph).
- Identity / mass result — the MS data confirming molecular weight.
- Testing laboratory — the name of the lab that ran the tests, which matters enormously (see below).
Third-party vs in-house testing
Not all CoAs carry the same weight. A report generated by an independent, third-party analytical laboratory is far more credible than one produced in-house by the seller, because the lab has no commercial stake in the result. When you review a CoA, check whose name is on it. Independent, accredited labs that specialize in peptide analysis are the standard the most transparent vendors hold themselves to.
How to verify a CoA is genuine
A CoA is only useful if it is real and if it matches your material. To verify it:
- Match the lot number on the CoA to the lot number on the vial or product page.
- Look for a verification method — many analytical labs provide a QR code or an online lookup so you can confirm the report was actually issued by them.
- Confirm both tests are present — purity (HPLC) and identity (MS).
- Check the date — the analysis should correspond to the batch you are receiving.
Red flags to watch for
- No batch or lot number, or a CoA that cannot be matched to a specific vial.
- Purity reported without a chromatogram, or identity claimed without mass-spec data.
- In-house testing only, with no independent laboratory named.
- A single generic CoA reused across every product rather than one per batch.
- No way to verify the document with the issuing lab.
How SOMA Research documents purity
Every compound in the SOMA Research catalog is verified for identity and purity, with documentation tied to the batch. You can review our approach on the Quality & Testing page and browse batch documentation in our Certificates of Analysis library. All products are supplied strictly for laboratory and research use only.
Frequently asked questions
What purity should a research peptide CoA show?
For research-grade peptides, a purity of 98% or higher measured by HPLC is the common working standard, with the exact figure stated on the batch CoA.
Why does a CoA need both HPLC and mass spectrometry?
HPLC measures purity — how much of the sample is the target compound. Mass spectrometry confirms identity — that the compound is the correct molecule. Together they verify a peptide is both pure and correct.
What is a batch or lot number?
It is a unique identifier for a specific production run. It lets you match a Certificate of Analysis to the exact material you received, rather than to the product in general.
Is in-house testing enough?
Independent third-party laboratory testing is more credible than in-house testing because the lab has no commercial interest in the outcome. The most transparent vendors publish third-party results.
Related guides
- HPLC vs mass spectrometry: why a CoA needs both
- Peptide storage and stability
- How to reconstitute a research peptide
SOMA Research products are intended for laboratory and research use only. They are not drugs, foods, cosmetics, or supplements, are not intended to diagnose, treat, cure, or prevent any disease or condition, and are not for human or animal consumption.
